Failure Modes and Effects Analysis (FMEA) Technique:A Literature Review

Authors

  • Pouya Sheikh Damanab Department of Occupational Health Engineering, Health Faculty, Tabriz University of Medical Sciences, Tabriz, IRAN
  • Seyed Shamseddin Alizadeh Department of Occupational Health Engineering, Health Faculty, Tabriz University of Medical Sciences, Tabriz, IRAN
  • Yahya Rasoulzadeh Department of Occupational Health Engineering, Health Faculty, Tabriz University of Medical Sciences, Tabriz, IRAN
  • Parisa Moshashaie Department of Occupational Health Engineering, Health Faculty, Tabriz University of Medical Sciences, Tabriz, IRAN
  • Sakineh Varmazyar Department of Occupational Health Engineering, Health Faculty, Qazvin University of Medical Sciences, Qazvin, IRAN

Keywords:

Risk Assessment, Failure Modes and Effects Analysis, FMEA, Reliability

Abstract

Risk management and improve the reliability of the process, are the issues which have become more important in production and operations management literature. Risk assessment is an important tool in risk management to reduce project risks and achieve sustainable development.  At present the risk assessment is concerned in planning and policy-making in most of the world countries. There are several techniques for identifying hazards and assessing risks. One of the most important of these techniques is Failure Modes and Effects Analysis (FMEA). FMEA is an efficient tool for the identification of potential failure modes and their effects in order to increase the reliability and safety of complex systems. Also this technique is useful to gather data needed for decision making and risk control. In fact, the purpose of this technique is: a. to identify failure modes and their effects; b. to specify the corrective actions to eliminate or reduce the probability of failure and ultimately c. development of efficient maintenance system to reduce the occurrence of potential scenarios. In this study, several other studies have investigated and tried to explore a range of its benefits and uses and also the method of risks computation using this technique is presented.

References

Adl, j., . (2014). "Risk Assessment of sweetening part of gas treatment unit in Gas Refinery."

Alimoohamadi, a. (2008). "the comparison of furnaces safety in two plaster factories by the FMEA failure analysis method and its works." Iran Occupational Health.

Alizadeh, S., S. Mortazavi, et al. (2014). "Building a Model Using Bayesian Network for Assessment of Posterior Probabilities of Falling From Height at Workplaces." Health Promot Perspect 4(2): 187-194.

Alizadeh, S. S., S. B. Mortazavi, et al. (2013). "Analysis of Iranian construction sector occupational accidents (2007-2011)." Scientific Journal of Review 2(7): 188-193.

Arabzadeh, m. (2012). " Providing a new approach to select suppliers based on Kraljyk model using FMEA method and integer programming." Production and Operations Management.

Bahrami, M. (2012). "Innovation and Improvements In Project Implementation and Management; Using FMEA Technique." ELSEVER.

Bolbolamiri, n., . (2010). " Evaluation of passenger trains firing risk using the Gray’s theory-phase FMEA approach." Transportation Engineering.

Cândeaa, G. (2014). "sage of case-based reasoning in FMEA-driven software." ELSEVER.

Davoodpour, z. (2012). "Using FMEA techniques in the field of urban planning to prevent and solve urban problems, urban case study of students in Tehran park." Journal of Urban Studies and Planning.

Dori, B. (2008). "Integrated approach to risk analysis using failure modes and effects analysis (FMEA) and process network analysis (APN)."

Ebrahimipour, V. (2009). "An Ontology Approach to Support FMEA Studies."

Ebrahimzadeh, m. (2011). " Evaluation of the potential risks in Shiraz refinery with analysis of risk scenarios and the effects of the FMEA." Journal of Occupational Medicine Specialist.

Hojjatnejad, a. (2008). "assessment of spherical tank safety using FMEA and ETBA metods." Kermanshah University of Medical Sciences Journal.

Hosseinialamdavari, m. (2011). "risk assessment by FMEA method and comparison of RPN before and after corrective action in Bafg direct iron reduction projects." Seventh National Conference on Occupational Health and Safety.

Jafari, m. (2009). "TBM risk analysis by the analysis of failure modes and its effects." Proceedings of the Eighth Conference of the tunnel.

Kmenta, S. (2000). "scenario-based fmea: a life cycle cost perspective." Proceedings of DETC.

Larybaggal, m., . (2011). " FMEA application in environmental risk assessment: a case of Imam Khomeini port dredging berths." Journal of wetland.

Maleki, a. (2006). "Designing and modeling of an integrated structure of QFD / FMEA in health care centers." Quarterly monitoring.

Namdari., m. (2010). "Analysis of Potential Failure Modes and Effects of its FMEA to reach a desirable moldboard plowing." Journal of Agricultural Machinery.

Narayanagounder, S. (2009). " A New Approach for Prioritization of Failure Modes in Design FMEA using ANOVA. World Academy of Science." Engineering and Technology.

Noori, j. (2008). " Environmental assessment and risk management of a training center using FMEA metod " Environmental Science and Technology.

Omidvari, m. (2012). "Occupational health and environmental risk assessment model in transportation and oil supplys using FMEA method combining with AHP." Journal of Research in Health Systems.

Parvin, N., S. S. Alizadeh, et al. (2007). "Hazards Identification and Assessment in a Production Factory Using Job Safety Analysis (JSA)." Journal of Environmental Science and Technology 8: 4.

SAIPA (2005). "FMEA Failure Modes Analysis Guide."

Sedagat, a. (2008). " assessment and management of an emergency military field using the EAFM method."

Published

2015-01-28

How to Cite

Sheikh Damanab, P. ., Shamseddin Alizadeh, S. ., Rasoulzadeh, Y. ., Moshashaie, P. ., & Varmazyar, S. . (2015). Failure Modes and Effects Analysis (FMEA) Technique:A Literature Review. Scientific Journal of Review, 4(1), 1-6. Retrieved from http://sjournals.com/index.php/sjr/article/view/447

Issue

Section

Engineering